How to Download and Install Autocom CDP VCI Driver for Your Car Diagnostic Tool
If you are looking for a reliable and easy-to-use car diagnostic tool, you might have heard of Autocom CDP. Autocom CDP is a professional device that can perform various functions such as reading and erasing fault codes, displaying live data, activating components, adjusting settings, and more. Autocom CDP works with most cars, trucks, and buses that support OBD2 protocols.
However, before you can use Autocom CDP, you need to install the correct driver for your vehicle communication interface (VCI). The VCI is the hardware that connects your Autocom CDP device to your car's diagnostic port. Without the proper driver, your VCI will not be recognized by your computer or your Autocom software.
In this article, we will show you how to download and install Autocom CDP VCI driver for Windows. Follow the steps below and you will be able to use your Autocom CDP device in no time.
Step 1: Download the Autocom CDP VCI driver
The first step is to download the Autocom CDP VCI driver from the official website of Autocom Diagnostic Partner AB. You can also download the driver from Treexy, a trusted source of drivers for various devices.
The driver file is a ZIP archive that contains two versions of the driver: one for 32-bit Windows and one for 64-bit Windows. To find out which version of Windows you have, right-click on the Start menu and select System. Under Device specifications, look for System type.
Once you have downloaded the driver file, extract it to a folder on your computer. You will see two folders: x86 for 32-bit Windows and x64 for 64-bit Windows. Choose the folder that matches your system type.
Step 2: Install the Autocom CDP VCI driver
The next step is to install the Autocom CDP VCI driver on your computer. To do this, follow these steps:
Insert the USB security dongle that came with your Autocom CDP device into a USB port on your computer. The dongle will control what installations are available.
Run the setup.exe file from the folder that you extracted in the previous step. Follow the instructions in the installation wizard.
The License Activation Tool (LAT) will start automatically and connect to the Internet to retrieve accurate license information for your unique VCI serial number. The installation will now start and it may take a few minutes to complete.
When the installation is finished, you will see a message that says \"Installation completed successfully\". Click Finish to exit the wizard.
Congratulations! You have successfully installed the Autocom CDP VCI driver on your computer. You can now connect your VCI to your car's diagnostic port and launch the Autocom software to start diagnosing your vehicle.
How to Use the Autocom Software
After installing the Autocom CDP VCI driver, you can use the Autocom software to diagnose your vehicle. The Autocom software is a powerful and user-friendly program that allows you to perform various functions such as reading and erasing fault codes, displaying live data, activating components, adjusting settings, and more.
To use the Autocom software, you need to do the following:
Connect your VCI to your car's diagnostic port using the supplied cable. The diagnostic port is usually located under the dashboard or near the steering wheel.
Connect your VCI to your computer using the USB cable. The VCI will light up green when it is connected.
Launch the Autocom software from your desktop or start menu. You will see the main screen of the software with four options: Cars, Trucks, Buses, and Generic OBD.
Select the option that matches your vehicle type. For example, if you have a car, select Cars.
Select your vehicle make, model, and year from the list. You can also use the search function to find your vehicle faster.
Select the system that you want to diagnose from the list. For example, if you want to check the engine, select Engine.
Select the function that you want to perform from the list. For example, if you want to read fault codes, select Read DTCs.
Follow the instructions on the screen to complete the function. You can also view live data, graphs, and freeze frames by clicking on the icons on the top right corner of the screen.
That's it! You have successfully used the Autocom software to diagnose your vehicle. You can repeat these steps for any system or function that you want to check. You can also save or print reports of your diagnosis by clicking on the icons on the bottom right corner of the screen.
In this article, we have shown you how to download and install Autocom CDP VCI driver for Windows and how to use the Autocom software to diagnose your vehicle. Autocom CDP is a professional and easy-to-use car diagnostic tool that can help you troubleshoot and fix various problems with your vehicle. We hope this article has been helpful and informative for you. If you have any questions or feedback, please feel free to contact us.
Benefits of Using Autocom CDP
Autocom CDP is not just a car diagnostic tool, it is also a smart and versatile device that can offer you many benefits. Here are some of the benefits of using Autocom CDP:
It can save you time and money by helping you diagnose and fix your vehicle problems yourself, without having to visit a mechanic or a dealer.
It can improve your vehicle performance and fuel efficiency by detecting and clearing any faults that may affect your engine, transmission, brakes, and other systems.
It can enhance your vehicle safety and comfort by checking and adjusting your airbags, ABS, ESP, climate control, and other features.
It can support most cars, trucks, and buses that are compatible with OBD2 protocols, which means you can use it for multiple vehicles.
It can update itself automatically via the Internet, which means you can always have the latest software and firmware for your device.
Frequently Asked Questions About Autocom CDP
If you have any questions about Autocom CDP, you might find the answers in this section. Here are some of the most frequently asked questions about Autocom CDP:
What is the difference between Autocom CDP and Autocom CDP+?
Autocom CDP and Autocom CDP+ are both car diagnostic tools from Autocom Diagnostic Partner AB. The main difference between them is that Autocom CDP+ has a built-in Bluetooth module that allows you to connect your device to your computer wirelessly. Autocom CDP requires a USB cable to connect to your computer.
What is the warranty period for Autocom CDP?
Autocom CDP comes with a one-year warranty from the date of purchase. If you encounter any problems with your device within this period, you can contact the seller or the manufacturer for support or replacement.
How can I update my Autocom CDP software and firmware?
To update your Autocom CDP software and firmware, you need to connect your device to your computer and launch the Autocom software. Then, click on the Update icon on the main screen and follow the instructions. You will need an Internet connection to download the latest updates.
Can I use Autocom CDP on other operating systems besides Windows?
No, Autocom CDP only works on Windows operating systems. It is not compatible with Mac OS, Linux, or Android.
How to Troubleshoot Autocom CDP Problems
Autocom CDP is a reliable and easy-to-use car diagnostic tool, but sometimes you may encounter some problems with it. Here are some of the common problems that you may face and how to solve them:
My Autocom CDP device is not recognized by my computer.
This problem may be caused by a faulty USB cable, a damaged USB port, or a missing or corrupted driver. To fix this problem, you can try the following solutions:
Check if the USB cable is properly connected to your device and your computer. Try using a different USB cable or a different USB port.
Check if the USB security dongle is inserted into your computer. The dongle is required for the device to work.
Check if the Autocom CDP VCI driver is installed on your computer. If not, download and install the driver from the official website of Autocom Diagnostic Partner AB or Treexy.
Restart your computer and your device and try again.
My Autocom CDP device cannot communicate with my vehicle.
This problem may be caused by a loose or incompatible connection, a low battery voltage, or a wrong vehicle selection. To fix this problem, you can try the following solutions:
Check if the VCI is properly connected to your vehicle's diagnostic port. Make sure the port is clean and not damaged. Try using a different cable or a different port.
Check if your vehicle's battery is fully charged and not drained. If the battery voltage is too low, the device may not work properly.
Check if you have selected the correct vehicle make, model, and year in the Autocom software. If not, select the right vehicle from the list or use the search function.
Restart your device and your vehicle and try again.
My Autocom CDP device shows an error message or freezes.
This problem may be caused by a software glitch, a corrupted file, or a hardware malfunction. To fix this problem, you can try the following solutions:
Check if your Autocom CDP software and firmware are up to date. If not, update them via the Internet using the Autocom software.
Check if your Autocom CDP device has enough memory space. If not, delete some unnecessary files or use an external memory card.
Reset your Autocom CDP device by pressing and holding the power button for 10 seconds. This will clear any temporary errors or glitches.
If none of these solutions work, contact the seller or the manufacturer for support or repair.
In this article, we have shown you how to download and install Autocom CDP VCI driver for Windows and how to use the Autocom software to diagnose your vehicle. We have also discussed the benefits, the frequently asked questions, and the troubleshooting tips for Autocom CDP. Autocom CDP is a professional and easy-to-use car diagnostic tool that can help you troubleshoot and fix various problems with your vehicle. We hope this article has been helpful and informative for you. If you have any questions or feedback, please feel free to contact us. d282676c82